Drag Conveyors
FBL Overhead
1212 FBL Overhead Drag Conveyors
120 ton per hour capacity (based on 60 lb. per cu. ft. material)
1214 FBL Overhead Drag Conveyors
Standard Features: Head Section
- 3/16” #304 stainless steel shell construction
- Bolt on #304 top cover
- Heavy duty stainless steel reversable motor mount, bolt-on design for access to drive sprocket
- TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 40 HP
- Heavy duty shaft mounted gearbox
- Heavy four bolt bearings, with UHMW dust seals
- Heavy duty drive sprocket
Intermediate (Straight) Sections
- Available in lengths from 1’ to 9’-10”(10’), in 6” increments
- 12 ga. #304 stainless steel “u” trough sections
- Bolt on top covers
- Heavy duty #304 1 1/2 angle bolt flanges
- UHMW return rollers, with stainless steel shafts
Drop Door Sections
- Standard doors for filling indoor bins
- 12 ga. #304 stainless steel shell construction
- #304 door handles, latches, hinges, and catches with one hand operation
- Large 42” long opening, to reduce carry over
- UHMW return rollers, with stainless steel shafts
Inlet Hopper Section
- 12 ga. #304 stainless steel construction
- Avaliable with round or square spouting connection
Tail Section
- 10 ga. #304 stainless steel shell construction
- Bolt on #304 top cover
- #304 stainless steel take-up bolts
- Heavy bearings, mounted on #304 stainless steel take-up mounts
- Heavy duty tail sprocket
Chain & Paddles
- XH88 Heavy Duty Pintle Chain, with paddle attachment every foot
- 5/8” thick UHMW paddle
Optional Features:
- Available with enclosed doors for applications outside applications (above roof) or where material needs to be spouted to a desired location
- Stainless steel square to round transitions, flange rings, clamp bands, & spouting
Flight Star Incline
1212 Flightstar Drag Conveyors 120 tons per hour
1616 Flightstar Drag Conveyors 200 tons per hour
Standard Features: Head Section
- 3/16” #304 stainless steel shell construction
- 10 ga. #304 stainless steel divider (wear) pan
- Bolt on #304 top cover
- Heavy duty stainless steel tubing motor mount, bolt-on design for access to drive sprocket
- TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 100 HP
- Heavy duty shaft mounted gearbox
- Heavy pillow block bearings, mounted on #304 stainless steel mounts
- Heavy duty drive sprocket
- Stainless steel discharge to 10” round or 12” square
Intermediate (Straight) Sections
- Available in lengths from 1’ to 9’-10”(10’), in 6” increments
- 12 ga. #304 stainless steel “u” trough sections
- 12 ga. #304 stainless steel divider (wear) pan, bolt-in design for easy cleaning
- Bolt on top covers
- Heavy duty #304 1 1/2 angle bolt flanges
Curve Section
- Available in angles from 10 degrees to 60 degrees, in 5 degree increments
- 10 ga. #304 stainless steel side plates
- 10 ga. #304 stainless steel divider (wear) pan
- Bolt on top covers
- Heavy duty #304 bolt flanges
Hopper Section
- Available in lengths from 2’, 3’, 4’ increments
- 12 ga. #304 stainless steel shell construction
- 12 ga. #304 stainless steel divider (wear) pan
- #304 stainless steel weight breaker
- Heavy duty #304 1 1/2″ angle bolt flanges
- #304 stainless steel adjustable flow control gates
Tail Section
- 3/16” #304 stainless steel shell construction
- 10 ga. #304 stainless steel divider (wear) pan
- Bolt on #304 top cover
- #304 stainless steel take-up bolts
- Heavy bearings, mounted on #304 stainless steel take-up mounts
- Heavy duty tail sprocket
Chain & Paddles
- XH88 Heavy Duty Pintle Chain, with paddle attachment every foot
- 5/8” thick UHMW paddle
Optional Features:
- Pit drive over grates
- Mild steel support stands, available from 2’ tall thru 40’ tall
- Stainless steel square to round transitions, flange rings, clamp bands, & spouting
- Rubber pit cover
- Air drop doors