Doyle Manufacturing builds three types of Bucket Elevator:
- 1090 – 90 tons per hour (based on 60 lbs per cu ft material)
- 2012 – 120 tons per hour (based on 60 lbs per cu ft material)
- 2415 – 200 tons per hour (based on 60 lbs per cu ft material)
1090 Bucket Elevator
Standard Features:
- #304 stainless steel construction
- 20 ft. thru 70 ft. discharge heights available
- 90 ton per hour capacity (based on 60 lb. per cu. ft. material)
- 12″ #304 stainless steel turnkleen idler and rubber covered drive drum
- #304 stainless steel take-up bolts and hardware
- #304 stainless steel clean out and inspection doors in boot section
- #304 stainless steel inspection door in head section
- #304 stainless steel service door / clean out in first trunk section
- 11″ wide PVC belt
- 10″ x 6″ polyethylene buckets on 7″ centers
- Stainless steel bucket hardware
- Jackshaft drive, includes V-belt, sheaves, bushings, sprockets, chain, and TEFC motor
- 28″ wide x 25″ deep x 40″ high intake hopper
Optional Features:
- Ladders, cages, and platforms
- Spouting and spouting accessories available (1090 head discharge is 12″ square)
- Second intake hopper
- Intake hopper cover
- Payloader inload hopper, 4 ft. wide x 8 ft. long
- Fertilizer conditioner in above payloader hopper
- Gearbox drive
- #304 stainless steel digger buckets
Download Product Brochure (PDF)
2012 Bucket Elevator
Standard Features:
- #304 stainless steel construction
- 15 ft. thru 90 ft. discharge heights available
- 120 ton per hour capacity (based on 60 lb. per cu. ft. material)
- 12 ga.#304 stainless steel head and boot sections, with 7 ga. #304 angle supports
- 14 ga. #304 stainless steel trunking sections
- #304 stainless steel clean out in both sides of boot section
- #304 stainless steel bolt on service door / clean out in first trunk section
- 20″ diameter vulcanized rubber, herringbone pattern, head roller
- 20″ diameter turnkleen style boot idler roller
- #304 stainless steel take-up assemblies
- #304 stainless steel assembly hardware
- 11″ wide rubber belt
- 10″ x 6″ polyethylene buckets on 8″ centers
- Stainless steel bucket hardware
- Shaft mount drive, includes V-belt, sheaves, bushings, and TEFC motor
- 24″ wide x 24″ deep x 56″ high intake hopper
Optional Features:
- Ladders, cages, and platforms
- Spouting and spouting accessories available (2012 head discharge is 12″ square)
- Second intake hopper
- Intake hopper cover
- Payloader inload hopper, 4 ft. wide x 8 ft. long
- Fertilizer conditioner in above payloader hopper
- Distributor platform, large or small
Download Product Brochure (PDF)
2415 Bucket Elevator
Standard Features:
- #304 stainless steel construction
- 15 ft. thru 90 ft. discharge heights available
- 200 ton per hour capacity (based on 60 lb. per cu. ft. material)
- 12 ga.#304 stainless steel head and boot sections, with 7 ga. #304 angle supports
- 14 ga. #304 stainless steel trunking sections
- #304 stainless steel clean out in both sides of boot section
- #304 stainless steel bolt on service door / clean out in first trunk section
- 24″ diameter vulcanized rubber, herringbone pattern, head roller
- 24″ diameter turnkleen style boot idler roller
- #304 stainless steel take-up assemblies
- #304 stainless steel assembly hardware
- 14″ wide rubber belt
- 13″ x 6″ polyethylene buckets on 8″ centers
- Stainless steel bucket hardware
- Shaft mount drive, includes V-belt, sheaves, bushings, and TEFC motor
- 24″ wide x 24″ deep x 56″ high intake hopper
- Factory assembled & tested
Optional Features:
- Ladders, cages, and platforms
- Spouting and spouting accessories available (2415 head discharge is 14″ square)
- Second intake hopper
- Intake hopper cover
- Payloader inload hopper, 4 ft. wide x 8 ft. long
- Fertilizer conditioner in above payloader hopper
- Distributor platform, large or small